Public

Download

public@talk.mikrotik.com.au

February 2015

13 participants
12 discussions

Strange routerboard behavoir
by Paul Julian 01 Feb '15

01 Feb '15

Hi guys, we have a large hotspot site which is doing some funny things and I was just wondering if anybody may have seen similar behaviour before. We have a 5Ghz backhaul network which runs flawlessly, running with a mix of SXT's and Omnitiks from a central AP out to a number of CPE's. Off the back of each CPE we run a 411 with a 2.4Ghz radio in it and an omni antenna, plugged into ether1 on each device. What happens sometimes is that we lose sight of the AP connected to a CPE, we can't ping it, however the AP shows in the neighbours list on the CPE and the Ethernet port shows as running, for all intents and purposes everything looks fine, however when you try to telnet from the CPE to the AP you can't connect, when you try and mac-telnet from the CPE to the AP it disconnects and doesn't work. After a varying period of time the connection just starts working again, the uptime of the AP is normal, i.e. it hasn't lost power or rebooted and everything just works OK....until the next time which could be hours or days, no pattern seems to exist. Has anybody encountered such issues before at all ? I have so far replaced the Ethernet joiner between the radios and also replaced the power pack and POE injectors which feed the radios. Any suggestions would be appreciated. Thanks Paul

3 7

BFD + OSPF + ROS and BFD + BGP + ROS
by Alex Samad - Yieldbroker 01 Feb '15

01 Feb '15

Hi I have asked this question on the forums but got no reply I want to run BFD and OSPF together. I have a few routers that have multiple legs of OSPF, but I can't run BFD on some legs, because I have some legacy cisco equipment that doesn't do BFD (ASA5520 8.5). Can I limit BFD to specific legs of OSPF determined network interface Can I limit BFD support on BGP by specific peers even if I have multiple peers on the same interface, last one can I have multiple BGP + BFD peers on the same interface ??? A Alex Samad | Network And System Manager | Yieldbroker * +61 2 9994 2893 | ( +61 438 838 143 | * alex.samad(a)yieldbroker.com<mailto:alex.samad@yieldbroker.com> This email is confidential and intended for the addressee only. If you may have received this email in error please delete it and notify the sender immediately. Recipients should not forward, disclose, distribute or copy this e-mail or any attachments in whole or part without the express permission of the sender. Views expressed in this message are those of the individual sender, except where they are specifically stated to be those of Yieldbroker. Yieldbroker accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing. Yieldbroker can not guarantee the integrity of this communication and shall not be liable for e-mail which may be intercepted, corrupted, lost, spoofed, delayed, incomplete, or virus infected.

3 4