- Public - talk.mikrotik.com.au

Re: [MT-AU Public] RB SXT LTE
by Karl Auer 22 Jan '16

22 Jan '16

On Fri, 2016-01-22 at 15:02 +1100, Matt Perkins wrote: > I would be interested to know if they work too. Is it really too expensive to buy one or two to test? Hey, why not each pay half? These are MikroTik prices, remember. At your pay grades, you've probably already spent about three times the price of one just discussing it... Regards, K. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Karl Auer (kauer(a)nullarbor.com.au) work +61 2 64957435 http://www.nullarbor.com.au mobile +61 428 957160 GPG fingerprint: 6D59 8AE6 810D 44E3 7626 7040 4DD6 F89F 3053 4774 Old fingerprint: 9DCA 0903 BCBD 0647 BCCC 2FA7 A35C 57A1 ACF9 00BB

2 1

Re: [MT-AU Public] CCR performance testing again
by Alex Samad - Yieldbroker 22 Jan '16

22 Jan '16

Just checked /system resource cpu 36 cpu doing ~100% (97-98%) load and irq ... feels like somethings wrong there. A -----Original Message----- From: Alex Samad - Yieldbroker Sent: Thursday, 21 January 2016 1:57 PM To: public(a)talk.mikrotik.com.au Subject: CCR performance testing again Hi I'm testing switches again and doing a comparison to the CCR. For some reason I can't seem to get past 1Gb/s without losses on my ccr1036. Now this could be my VM's as VM to VM I can only get around 2-3Gb/s before iperf starts complaining .. How are other people's experience with the CCR's I know about the 1Gb/s tcp stream limit, but I hand heard of any issues with UDP. Infact I was pretty sure I had push it up to 9.8Gb/s.. but that was a while ago A

3 5

CCR performance testing again
by Alex Samad - Yieldbroker 21 Jan '16

21 Jan '16

Hi I'm testing switches again and doing a comparison to the CCR. For some reason I can't seem to get past 1Gb/s without losses on my ccr1036. Now this could be my VM's as VM to VM I can only get around 2-3Gb/s before iperf starts complaining .. How are other people's experience with the CCR's I know about the 1Gb/s tcp stream limit, but I hand heard of any issues with UDP. Infact I was pretty sure I had push it up to 9.8Gb/s.. but that was a while ago A

1 0

[FS] 2x Astaro Security Gateway 625 ASG625
by Tim Warnock 11 Jan '16

11 Jan '16

Hey Guys, I have a pair of ASG625s for sale. I have them running MikroTik x86 on a USB thumb drive. The ASG625 is a 2RU dual CPU, quad core intel xeon @ 3ghz with 18 (!) intel E1000 interfaces (not switch ports) 10 are 10/100/1000 copper, 8 are 1G SFP and has dual PSUs. If you are interested, please drop me a line :- timoid(a)timoid.org?subject=ASG625 otherwise sorry for the noise. -Tim

2 1

scripting question
by Alex Samad - Yieldbroker 10 Jan '16

10 Jan '16

Hi I keep a single rsc file for 2 CCR's that have the same firewall rules simple like /ip firewall filter remove [ find ] # ##### # YB IN # ##### add action=jump chain=YBIN comment="Check YB SRC" jump-target=YBSRC add chain=YBIN comment="Allow SSH" dst-port=22 protocol=tcp add chain=YBIN comment=OSPF protocol=ospf add chain=YBIN comment=NTP dst-port=123 protocol=udp src-port=123 Now I find I have need to have specific rules for each router, for natting. is there some what to include some sort if statement where I can go if hostname = rtr1 then include this line instead of having to have 2 files.

3 6

Re: [MT-AU Public] Dark Fibre
by Jason Clarke 09 Jan '16

09 Jan '16

Hi All, Sorry about not related to MikroTik (it will be if we can lease the fibre) But I was wondering if anyone knew who to contact about leasing VicTrack fibre? Regards, Jason

1 0

Network design
by Russell Hurren 30 Dec '15

30 Dec '15

Hi everyone I'm designing a network for a large accommodation facility. It'll have an office/conference hall containing the server room and 8 houses (mixture of 1, 2 and 3 storey). Later on they'll add numerous small units at the other end of the site. My thoughts were to use an AxiomTek NA850 (http://axiomtek.com/Default.aspx?MenuId=Products&FunctionId=ProductView&Ite…) with 3x 4 port 10GbE running RouterOS as the main switch, a CCR1016-12S-1S+ as a secondary (so we've still got 1Gbps if the 10Gbps fails, but cheaper than 2x 10Gbps switches). I'd put CRS226-24G-2S+RMs in each of the buildings. The site will have NBN. It's a non-profit organisation so I don't think they'll go for enterprise fibre. Might go for multiple NBN links, not so much for redundancy but to separate voice and data etc. When they build the second stage, I was going to have a half height rack somewhere with another CCR1016-12S-1S+, and that connecting to either CRS125-24G-1S-RMs, or perhaps wall mount RB2011's or similar. My questions: . Will I get wirespeed switching at 1Gbps on the CCR, and at 10Gbps on the NA850? It'd be a dual Xeon with as much RAM as I need to specify. . What should I use a router? Perhaps a CCR1009-8G-1S-1S+? The bypass feature of the RB1100AHx2 was interesting (and the AxiomTek's have a bypass feature too) but I'm not sure how much cpu power I need. The site is a day's drive from me, so it needs to be reliable. There's people onsite who can handle things like swapping out a power supply (as long as I've got a way of detecting a failed one). Regards Russell Hurren Managing Director Zero Point Networks PTY LTD (08) 6262 ZERO

3 8

PowerBox
by Andrew Gilbett 29 Dec '15

29 Dec '15

Hi Guys, Just a question on the PowerBox series. I noticed that the non "Box" versions have seen an update. Is there any likely hood that the POE version will become gigabit? (and in an external box aka PowerBox Gigabit)? I have a couple of little jobs where an outdoor gig switch would be very useful! Thanks Andrew

2 1

CRS109-8G-1S-2HnD-IN usb port not working with LTE
by Andrew Gilbett 29 Dec '15

29 Dec '15

Hi Guys, I have a Huawei E8372 that works on a hAP just fine. But when I plug it into a CRS109-8G-1S-2HnD-IN it does not register as an LTE device even though both devices are running the same firmware. Nor does it work as a PPP device on either mikrotik. Has any one had luck getting the USB port to work on the CRS? Any help would be very happily received! Thanks Andrew

6 9

some quick tests on ESXi with CHR
by Alex Samad - Yieldbroker 29 Dec '15

29 Dec '15

Hi I was looking forward to the CHR. Had budget to spend on the unlimited license. But I am bit let down by the initial numbers So ESX host. 3 vms Vm server A Vm server b Vm CHR Iperf -s -w 128M -I 10 Iperf -c <server ip> -w128M -I 10 A to B is [ 4] 0.0-10.0 sec 10.4 GBytes 8.96 Gbits/sec [ 4] 10.0-20.0 sec 11.7 GBytes 10.1 Gbits/sec [ 4] 20.0-30.0 sec 11.5 GBytes 9.89 Gbits/sec [ 4] 30.0-40.0 sec 11.6 GBytes 9.97 Gbits/sec [ 4] 40.0-50.0 sec 11.6 GBytes 9.99 Gbits/sec [ 4] 50.0-60.0 sec 11.7 GBytes 10.0 Gbits/sec [ 4] 60.0-70.0 sec 11.4 GBytes 9.79 Gbits/sec [ 4] 70.0-80.0 sec 11.7 GBytes 10.0 Gbits/sec [ 4] 80.0-90.0 sec 11.8 GBytes 10.1 Gbits/sec [ 4] 90.0-100.0 sec 11.6 GBytes 9.93 Gbits/sec [ 4] 100.0-110.0 sec 11.8 GBytes 10.1 Gbits/sec [ 4] 110.0-120.0 sec 11.7 GBytes 10.1 Gbits/sec [ 4] 120.0-130.0 sec 11.5 GBytes 9.90 Gbits/sec [ 4] 130.0-140.0 sec 11.5 GBytes 9.88 Gbits/sec [ 4] 140.0-150.0 sec 11.2 GBytes 9.63 Gbits/sec [ 4] 150.0-160.0 sec 11.7 GBytes 10.1 Gbits/sec [ 4] 160.0-170.0 sec 11.8 GBytes 10.1 Gbits/sec [ 4] 170.0-180.0 sec 10.2 GBytes 8.72 Gbits/sec [ 4] 180.0-190.0 sec 11.9 GBytes 10.2 Gbits/sec [ 4] 190.0-200.0 sec 11.7 GBytes 10.1 Gbits/sec Consistent 10Gb/s ... NO CHR A -> CHR -> B [SUM] 0.0-300.4 sec 70.5 GBytes 2.02 Gbits/sec Only 2Gb/s ... What am I missing and 100% cpu usage VM is 2 cpu 2G memory Vmxnet3 nics

2 3