- Public - talk.mikrotik.com.au

AWS CHR licenses
by Patrick Sayer 28 Dec '15

28 Dec '15

In case anyone has issues activating the higher level of licenses on AWS, they have a problem which is listed as a bug. The only license level on AWS CHR is the free level for now

4 5

CHR licences
by Patrick Sayer 23 Dec '15

23 Dec '15

Does anyone know how to actually purchase a CHR Licence? I have an instance running on AWS without any problems at all, now I need to be able to upgrade to the P1 Licence as I need more than the 1meg limit on the free instance (love now that I will be able to run bandwidth test from a AWS instance). Thanks in advance if anyone knows what I am doing wrong. Patrick

2 1

ROS access to mikrotik site
by Alex Samad - Yieldbroker 23 Dec '15

23 Dec '15

Hi Anyone know how if possible to get licensing and/or package updating to happen via a proxy ? Alex

1 0

CHR
by Alex Samad - Yieldbroker 23 Dec '15

23 Dec '15

Hi Do I see that CHR licenses are available ??? Alex

4 12

5GHz wireless
by Ben Williams 16 Dec '15

16 Dec '15

Hey, Is there any Mikrotik device that does 5GHz wireless? In my quick scan of the product list I couldn't see one. If not, does anyone know if there are any plans for 5GHz support? - Ben -- "If you made a Venn diagram [of my life], there would be two non-overlapping circles, one of which was labeled, 'Times when I am truly happy' and the other of which was labeled, 'Times when I am logged in as root, holding a cable, or have the case open.' " - Jamie Zawinski [jwz.org]

5 8

Holiday shopping times
by Jason Hecker (Up & Running Tech) 14 Dec '15

14 Dec '15

Hi Mike, When will Duxtel be closed for business or at least not processing orders over the break? Regards Jason Hecker --

3 2

Mikrotik NBN NNI head end router Queue issue
by Murray Southwell 14 Dec '15

14 Dec '15

Hi Guys, Is anyone using a MikroTik router as an NBN head end unit? And if so have you managed to create a traffic queue scenario which satisfies the NBN 10ms peak burst rate specification http://www.nbnco.com.au/content/dam/nbnco2/documents/sfaa-wba2-product-cata… We need to be able to configure the Peak Burst Size (PBS) down to less than 10ms. Anything in excess of that is dropped by NBN traffic policing. The limitation of the MikroTik OS (and maybe hardware) is that we can only configure PBS down to 1 second (25M/second) The result is that NBN traffic policing drops packets that exceed 0.25M/10ms, significantly impacting TCP throughput and exhibiting the anticipated sawtooth throughput profile as TCP constantly ramps up and drops back due to lost packets. To make it work I think we need to be able to set a peak burst rate such that a 25M NBN service can have a peak burst rate of 0.25M per 10ms or even better would be .125M/5ms (as 10ms is the Max spec of the NBN) If anyone has this working successfully, I would love to hear how you achieved it :) Kind regards Murray Southwell Tasmanet Pty Ltd Manager - Network Services murray(a)tasmanet.com.au 0361652511 0418145979

2 3

IP PROBLEM ON CCR1072-1G-8S+
by Matt Perkins 12 Dec '15

12 Dec '15

Hi All, Got a strange one. I have two CCR 1072's back to back with a short is run (1km or so) of single mode with two 10G SFP+ single mode. The SFP's and run has been previously used and again tested with Cisco equipment without fault. I have also used the same type of SFP+ with CCR1072's without fault. But except for this one setup. The problem is after a random period of time (minutes to hours) one of the CCR's stop's responding to IP. You cant Ping the CCR or connect to it locally. Console works and says all is fine but no bidirectional traffic over the interface. The exception to this is that CDP still seems to be working as you can see the broadcasts from the CCR on a dump at the other end of the link. You can also clear the arp cache at the other end and ping and the mac is re-learning indicating that something is still happening. The only fix appears to be a reboot. When the unit starts behaving normally again for a time. If you set the watchdog it happy reboots the CCR fixing the problem also. Tried 6.33.3 and also the latest RC no luck. My next move is to replace the hardware. But it's a very odd hardware fault has anyone else seen anything like this. Matt. -- /* Matt Perkins Direct 1300 137 379 Spectrum Networks Ptd. Ltd. Office 1300 133 299 matt(a)spectrum.com.au Level 6, 350 George Street Sydney 2000 Spectrum Networks is a member of the Communications Alliance & TIO */

3 6

Suggestion for CPE - 400Mbps
by Dave Browning 30 Nov '15

30 Nov '15

Hey Guys, Any suggestions for which Mikro to use as a CPE for 400M metro ethernet services? Dave Browning | Systems Engineer P 07 3369 7666 Level 1, 12 Railway Tce, Milton QLD 4064 This email and any files transmitted with it contain confidential information for the exclusive use of the intended recipient. If you received this email in error please notify Sentrian Pty Ltd immediately by return email to the sender and delete the original email. We do not guarantee that this email or any attached files are free of viruses. All recipients should undertake their own virus scanning.

3 4

Mikrotik with IPoE
by Stephen Schwetz 19 Nov '15

19 Nov '15

Hi All, I have a site that has just switched over to the NBN vdsl service. Optus have supplied their router, which I would like to replace with a vdsl bridge. Has anyone got any information on using the mikrotik with IPoE on the NBN, I would especially love to get a config if you have one. Cheers Stephen

6 17