- Public - talk.mikrotik.com.au

Mikrotik PPP Profile and Radius
by Paul Julian 22 Mar '17

22 Mar '17

Hi All, just wondering if anybody has ever had any luck with being able to set the PPP Profile for a radius user by using a Radius reply attribute ? People say it can't be done, there is no attribute listed in the AAA doco but hoping somebody might know of a way we could do it.... Thanks Paul

4 17

NBN Woes
by Ben Jackson - eLogik 22 Mar '17

22 Mar '17

Obviously I have a lot of customers who use Mikrotik devices as their main router. This is causing issues with the NBN's default method of delivering VOIP services as the short-sighted ISP's have all made the laughable assumption that everyone is going to use an ISP-provided CPE to plug their VOIP handset into. As you know these devices will pre-configure the SIP settings. For so many reasons, this of course is not the preferred setup, but it is left to me and others like me to explain why all of a sudden the VOIP service that comes bundled with the ISP's plan will not work with their equipment. I've been told that ISP's will not release the VOIP settings to end-users to facilitate the setup of a stand alone ATA such as the cisco SPA112. I'd just be interested to know how people are dealing with this situation. Cheers, Ben Jackson eLogik m:0404 924745 e: ben(a)elogik.net w: www.elogik.com.au [image: http://www.elogik.com.au] <http://www.elogik.com.au>

4 9

CCR1072
by Alex Samad 21 Mar '17

21 Mar '17

Hi Thought I would share my experience from the last couple of days. I was trying to provision a new 1G service onto one of these. Some reason couldn't get L2 going. So it works out that you have to turn off auto-negotiate and set the speed manually when using a 1G SFP in a 10G SFP+ port on the CCR1072 .. Alex

2 2

VRF & BGP
by Matthew Enger 21 Mar '17

21 Mar '17

Hello, I have two mikrotik routers with the internet public networks in a VRF and bgp running happily until I tried to add a second router which also had its internet network in a VRF. BGP just sits there at connect. If I remove the VRF on one of them, it all of a sudden connects. If the BGP desintation is not inside a VRF (well I assume it is not or the other end is not mikrotik, it works fine). I emailed mikrotik support and apparently there is a known issue with connecting two bgp peers if both ends are inside a vrf. Anyone else seen this and have any work arounds? I am running MPLS on the same router so I would prefer to keep the public internet on its own VRF. Matthew Enger | Managing Director PO Box 3279, The Pines, Victoria, 3109 T 1300 789 299 D 03 9909 3104 M 0406 532 792 F 03 8611 7946 m.enger(a)xi.com.au | www.xi.com.au This email message and any attachments are the property of X Integration. The contents of this email are copyright and may also be confidential and/or legally privileged. They are intended solely for the addressee and it is not intended that either confidentiality or privilege be waived or lost by mistaken delivery to you. Please notify us immediately and delete this communication if received in error. Consider the environment before printing this email.

3 4

SanDisk with CCR
by Alex Samad 20 Mar '17

20 Mar '17

Hi I have a ultra MicroSD card and it doesn't seem to register in my CCR 1072 and 1036s I insert and then go to /disk ... nothing there nothing in the logs either Any suggestions A

2 4

NBN VDSL
by Denis Hancock 18 Mar '17

18 Mar '17

Hi All We're starting to see some NBN rollout to our customers. Preference is to have the Mikrotik do all the work, any recommendations for VDSL modems ? -- *Denis Hancock*

12 16

Max Routed Throughout x86
by Dave Browning 17 Mar '17

17 Mar '17

Hi, What sort of speeds are people able to push (routed) through x86 routers before seeing TX/RX Errors/Drops? Underlying being ESX 6. Dave Browning | Network Engineer P 07 3369 7666 Level 1, 12 Railway Tce, Milton QLD 4064 This email and any files transmitted with it contain confidential information for the exclusive use of the intended recipient. If you received this email in error please notify Sentrian Pty Ltd immediately by return email to the sender and delete the original email. We do not guarantee that this email or any attached files are free of viruses. All recipients should undertake their own virus scanning.

4 22

CCR 1072 and SFPs
by Alex Samad 16 Mar '17

16 Mar '17

Hi I just tried one of my SFP 1G - original a Dell spec SFP, I had thought it would work in a CCR, my dell spec DAC's do ... Any way when I insert the SFP I see no log line item to say SFP inserted ! Are the CCR locked down in any way to SFP this is the sfp I have http://www.sfpex.com/320-2879 and need to replace with a comparable one for the CCR Alex

1 1

MicroSD cards
by Alex Samad 15 Mar '17

15 Mar '17

Hi has any one had any issue with microSD cards not working in CCR's. Alex

1 0

RouterOS hardening and notifcation setup
by Alex Samad 15 Mar '17

15 Mar '17

Hi Wonder what people do to harden their ROS boxes I have based my stuff of this https://www.manitonetworks.com/mikrotik/2016/5/24/mikrotik-router-hardening pretty sensible stuff then https://wiki.mikrotik.com/wiki/Securing_New_RouterOs_Router I like the section on /system logging which is what I am looking at now. Any gotchas to logging to disk. Seems like I can log any message to disk and remote .. Alex

2 2