Hi Mike (and list) I have tested SFP+ ER CWDM modules between a CCR1036 and a CCR1072 with no problems. This was on the bench via an attenuator and I had it running for a week with no major problems. Maybe I got lucky, if Mikrotik say it is not within design spec I would believe them. YMMV. On 30/10/2015 6:31 pm, "Mike Everest" <mike@duxtel.com> wrote:
Hi All!
I receive questions from various folks from time to time who need to take advantage of dark fibre runs > 20Km. I have already received confirmation from MT that none of their products currently support power required to deliver greater than LR modules, so I suppose that the only option is for some kind of third party switch or media converter would be required when using MikroTik routers at the endpoints?
Here is a query I received this afternoon:
"What are after is integrating a 45km Single mode dark fibre into our network, obviously mikrotik routers on each end. If we could push 10Gbps that would be awesome, however if we could obtain 2 or 3Gbps with a lot less effort that would most likely be the go to start with."
Does anyone have any suggestions for the OP? (I suggested that he post here, but perhaps he's a bit too shy to post in a public forum, so I offered to ask on behalf ;)
Any comments will be most appreciated!
Cheers, Mike.
_______________________________________________ Public mailing list Public@talk.mikrotik.com.au http://talk.mikrotik.com.au/mailman/listinfo/public_talk.mikrotik.com.au